Jablite Structural Voidformer is a bespoke, designed lightweight material that can be used instead of structural concrete or traditional aggregates in applications such as floors, bridge decks and ramps.
Jablite's in-house civil engineers provide design and technical support for project designers.
Tested in accordance with BS EN 1606
Lightweight blocks with a high strength to weight ratio
70 m³ delivered in one truck load
Inert, non-toxic void former will last for the project lifetime
Rated A and A+ in the BRE Green Guide
Technical support from our in-house Civil Engineer
One of our team will come to your office to deliver a CPD and to answer your questionsClick here to book
BBA Certificates and other supporting documents can be found in Technical ResourcesTechnical Resources
Structural Voidformer is supplied as blocks, cut sheest or bespoke shaped pieces to suit the application or project.
Standard block sizes are 2400mm x 1200mm up to a depth of 1200mm.
If required depth is greater than 1200mm additional sheets or blocks can be added as required.
Where the application requires Structural Voidformer to accommodate permanent long term imposed loads the
designer should take into account long term compressive creep.