Jablite profile roof insulation is bespoke designed to match any profiled roof and is suitable for new or refurbishment applications and will improve the thermal performance of an existing profile roof and of the building.
The insulation boards are designed to the profile of the roof to eliminate air gaps between the insulation and the roof system that could cause condensation.
Jablite manufactures and supplies a sample insulation board to check fitting on the roof profile before it is ordered.
We will conduct your site survey and provide a free sample of our profiled roof insulation to make sure it is a good fit on your roofBook here...
BBA Certificates and other supporting documents can be found in Technical ResourcesTechnical Resources
Jablite profiled board is supplied:
|In EPS 100 and EPS 150 as defined in BS EN 13163.|
|Maximum size: 2440 x 1220 x 610mm|
|Cut to exactly match the profiled shape it will be installed on|
|To any board thickness depending on construction or thermal requirements|
|With a flame-retardant additive achieving Fire Class E|
The following factory-bonded finishes are available for boards with a flat top surface:
|High performance felt underlay to BS 747|
|SBS polymer modified membrane|
Jablite profiled board has the following values for thermal conductivity (k-value):
The U-value is calculated on an average depth of the profiled board. The required U-value can be achieved by any given combination of existing cladding, insulation and weathering finish and must therefore be assessed individually.
Jablite Profiled Boards are available in grades 70, 100 and 150 dependent on the load they are required to take in use.
Grade 70 – used where the profiled insulation will not be under load, usually where a second profiled sheet is placed over the insulation and mechanically fixed to the existing deck.
Grade 100 – over any roof subject to maintenance traffic only
Grade 150 – recommended as a minimum grade where there may be constant foot traffic
Please note the load bearing capacity of existing roof decks should be checked prior to installation.
|+||Does Jablite manufacture to ISO 14001?|
|Yes, Jablite is certified to the BS EN ISO 14001 Environmental Management System standard.|
|+||Does Jablite EPS include any recycled material?|
|Yes. Jablite standard products use between 0% and 60% recycled material depending on the grade, type of product and recycled material availability. The recycled material is from off site sources e.g. clean offcuts from building sites or from the manufacturing process - 100% of Jablite's manufacturing EPS waste goes back into the manufacturing process.|
|+||How are Jablite products rated in the BRE Green Guide to Specification?|
|Jablite manufactures EPS (expanded polystyrene) products which are A+ rated in the BRE Green Guide, except for Jablite 300 grade insulation for inverted roofs which has an A rating|