Jablite All-in-One Thermal Floor System is a patented, structural insulation system consisting of pre-stressed concrete beams and all-in-one insulation boards in an easy-to-install kit.
BBA Certificates and other supporting documents can be found in Technical ResourcesTechnical Resources
Jablite insulation is supplied in EPS (expanded polystyrene) or in HP (high performance) EPS to provide the required thermal performance.
Jablite EPS insulation is 100% recyclable and Jablite provides a site collection of clean material cut offs and these are recycled back into insulation boards.
Jablite manufactures to ISO 9001 and ISO14001 certified standards.
Jablite All-in-One Thermal Floor System is CE marked. The Declaration of Performance (DOP) is available on request.
You can download the CE Marking approval certificate here
For specification of concrete toppings, please refer to our All-in-One Thermal Floor System BBA Certificate
|Based on 155mm Beams|
|A = 100% Full Panel Installation B = 75% Full Panel / 25% Half Panel Installation|
|Grey main panel at 0.030 and White insert at 0.033|
|75mm O/B||100mm O/B||125mm O/B||150mm O/B||200mm O/B|
|+||Does Jablite offer an Installation Service for its All-in-One products?|
|Yes Jablite will supply and install All-in-One Non Structural Topping (NST) for use with a non-structural topping and All-in-One Thermal Floor System.|
|+||Does Jablite manufacture to ISO 14001?|
|Yes, Jablite is certified to the BS EN ISO 14001 Environmental Management System standard.|