Jablite is the UK's largest producer of EPS products for insulation and civil engineering applications

Jabfloor (HP)

Overview

Jabfloor (HP) is a BBA-certified floor insulation used for these floor applications:

• Below ground supported slab
• Above slab below chipboard
• Above slab below screed
• Precast suspended concrete
• Cold Store

Key Benefits
  • British Board of Agrément (BBA) accredited, certificate 87/1796
  • Excellent thermal performance
  • Easy to install
  • Flood proof
  • Range of compressive strengths
  • Resistant to moisture
  • Lightweight and durable
  • Provides long lasting dimensional stability
  • Available with Class E fire retardant additive
  • A+ rated in the BRE Green Guide to Specification

Need more help?

BBA Certificates and other supporting documents can be found in Technical Resources

Technical Resources
Downloads & Specifications
Jabfloor (HP)

BBA Certificates and other supporting documents can be found in Technical Resources

Technical Resources
Technical information
Product specification

Compression Performance

The Jablite High Performance Jabfloor insulation range is available in Grade 70, 100 as defined by BS EN13163.

Jabfloor
HP 70
Jabfloor
HP 100
Nominal
Density (kg/m3)
15
20
Compressive Strength
1% (kN/m2)
20
45
Compressive Strength
10%
(kN/m2)
70
100
Shear Modulus
(kN/m2)
55
75
Shear Modulus
(kN/m2)
2100
2800

 

As a quick reference, the following guidance about use and design loads applies:

Jablite Jabfloor High Performance insulation is supplied in
a standard board size 2400 x 1200mm

 

High Performance Jabfloor 70 Downloads

High Performance Jabfloor 100 Downloads

 

FAQ
+Which thicknesses are available to order in Jabfloor HP?
There are standard thicknesses which are 25, 30, 40, 50, 60, 75, 100, 120, 150 and 200mm. However, other thicknesses are available to order.
+Can Jabfloor be used in all floor applications?
Yes, Jabfloor and Jabfloor HP are the most versatile insulants for use in all floor specifications and are available in: • A wide range of compressive strengths from 70kPa grade to 500kPa. • A wide range of thicknesses
+Is a damp proof membrane required when Jabfloor is placed over a beam & block floor?
No. In a suspended/ventilated beam & block floor, a damp proof membrane is not required. A radon membrane may be required in certain areas.
+What is the difference between Jabfloor and Jabfloor HP?
Jabfloor HP (High Performance) offers a more thermally efficient insulant to achieve lower U-values with a thinner board. It is a dark grey in colour making it easy to distinguish from its sister product Jabfloor which is white.